Abbasi, Roozbeh
Formation of amorphous and nano-crystalline phases via mechanical alloying of elemental powder with stoichiometric composition of Ni0.5Ti0.4Nb0.1 and their thermodynamic evaluation using Medima model [Volume 3, Issue 1, 2014, Pages 9-19]
Abdizadeh, H.
Investigation of magnetic and electrical properties of Cu30-Ni70/CNT nanocomposite produced by mechanical alloying [Volume 3, Issue 1, 2014, Pages 29-36]
Abedi, I.
Characterization and Comparison of the Nanostructured Heterogenous TiO2/Al2O3 and TiO2 Films [Volume 3, Issue 2, 2014, Pages 91-99]
Adibpur, Farhad
Effect of Sintering Time on Mechanical and Magnetic Properties of Cemented Carbides [Volume 3, Issue 1, 2014, Pages 1-8]
Aghaei, A.
Characterization and Comparison of the Nanostructured Heterogenous TiO2/Al2O3 and TiO2 Films [Volume 3, Issue 2, 2014, Pages 91-99]
Ahmadi, K.
Technical study of stucco ornamens in "Shah-shahan" house using XRD, SEM and wet chemistry [Volume 3, Issue 2, 2014, Pages 37-49]
Akbarpour, Sotudeh
Evaluation of Physical and Mechanical Properties of Hydroxyapatite/Titanium dioxide Composite Scaffold for Tissue Engineering Applications [Volume 3, Issue 3, 2014, Pages 17-26]
Alizadeh, Masoud
Investigation of Thermal Stresses in Micro and Nano-Structured Thermal Barrier Coatings [Volume 3, Issue 3, 2014, Pages 27-33]
Allahkaram, S.R.
The effect of substrate preparation and the peak current density in pulse platingof Cu-SiCnanocompositecoatingsonmorphology, grain size, porosity, hardness and corrosion properties [Volume 3, Issue 2, 2014, Pages 27-35]
Aminy, Mohammad
Investigating effect of CuO and TiO2 Nano Particles on Tribological Characteristics of Engine Oil [Volume 3, Issue 4, 2014, Pages 71-76]
Ashrafi, Ali
The corrosion resistance of the composite coatings Polyaniline/Urea-formaldehyde microcapsules containing healing agent [Volume 3, Issue 4, 2014, Pages 21-33]
Ataie, A.
Investigation of magnetic and electrical properties of Cu30-Ni70/CNT nanocomposite produced by mechanical alloying [Volume 3, Issue 1, 2014, Pages 29-36]
Azizi, Houshang
On the substrate wettability of a tungsten sol for the preparation of WO3 thin films [Volume 3, Issue 4, 2014, Pages 63-69]
B
Badpeyma, Iman
The corrosion resistance of the composite coatings Polyaniline/Urea-formaldehyde microcapsules containing healing agent [Volume 3, Issue 4, 2014, Pages 21-33]
Bahrevar, Mohamad Ali
On the substrate wettability of a tungsten sol for the preparation of WO3 thin films [Volume 3, Issue 4, 2014, Pages 63-69]
Bahrevar, MohammadAli
The effect of bath temperature on structural properties of CdS thin layer produced by chemical bath deposition [Volume 3, Issue 2, 2014, Pages 81-90]
Bakhshaei, P.
Investigation of magnetic and electrical properties of Cu30-Ni70/CNT nanocomposite produced by mechanical alloying [Volume 3, Issue 1, 2014, Pages 29-36]
Barhemmati, Nastaran
Investigating effect of CuO and TiO2 Nano Particles on Tribological Characteristics of Engine Oil [Volume 3, Issue 4, 2014, Pages 71-76]
Bazzaz Bonabi, Soheila
Effect of Partitioning Time and Temperature during Q&P Process on Mechanical Properties of 1.5142 Steel [Volume 3, Issue 3, 2014, Pages 1-8]
Bigdelou, N.
Protonation of Trioctylamine(TOA) With Sulfuric Acid [Volume 3, Issue 1, 2014, Pages 81-91]
D
Daneshmand, S.H.
The effect of graphene percent on mechanical properties of Cu/graphene nanocomposites [Volume 3, Issue 1, 2014, Pages 37-43]
Davoodi, Danial
Synthesis and Characterization of Al 7014 Nanostructure by Mechanical Alloying [Volume 3, Issue 3, 2014, Pages 79-87]
Doosti, Alireza
Investigation of Photocathodic Porotection Properties of TiO2/WO3 Coatings Prepared by Sol-Gel [Volume 3, Issue 3, 2014, Pages 49-57]
E
Ebadzadeh, T.
The Synthesis mechanism of B4C-TiB2 composite with spark plasma sintering [Volume 3, Issue 2, 2014, Pages 51-61]
Ebrahimi Kahrizsangi, Reza
The Effect of Time and TiCl4 Salt Concentration on the Nano TiO2/Carbon Composite Microspheres Morphology Synthesized by Solvothermal Method [Volume 3, Issue 2, 2014, Pages 63-70]
Ebrahimi Kahrizsangi, Reza
Investigation of Photocathodic Porotection Properties of TiO2/WO3 Coatings Prepared by Sol-Gel [Volume 3, Issue 3, 2014, Pages 49-57]
Emami, Seyed Amir Hossain
Synthesis and Characterization of Al 7014 Nanostructure by Mechanical Alloying [Volume 3, Issue 3, 2014, Pages 79-87]
Esfahani, H.
Synthesis of Polycaprolactam/Zinc Doped Hydroxyapatite Nanofibers via Electrospinning [Volume 3, Issue 3, 2014, Pages 59-66]
Eshraghi, Mohammad Javad
The effect of bath temperature on structural properties of CdS thin layer produced by chemical bath deposition [Volume 3, Issue 2, 2014, Pages 81-90]
F
Familifard, Adele
The Creation of Nanocomposite Ni-B4C Coatings on Cu by Electrocodeposition and Investigation of Corrosion Behavior [Volume 3, Issue 4, 2014, Pages 53-61]
Farahpoor, P.
Preparation of nanostructured TiO2-SnO2 films by aqueous sol-gel for gas sensor application [Volume 3, Issue 1, 2014, Pages 45-53]
G
Ganjkhanlou, Yadolah
On the substrate wettability of a tungsten sol for the preparation of WO3 thin films [Volume 3, Issue 4, 2014, Pages 63-69]
Ghanbari, Arezu
Remove Pb2+ and Ni2+ heavy metals by hydroxyapatite structure Prepared with acids and bases methods of aqueous solutions [Volume 3, Issue 2, 2014, Pages 71-79]
Ghashang, Majid
The Effect of Time and TiCl4 Salt Concentration on the Nano TiO2/Carbon Composite Microspheres Morphology Synthesized by Solvothermal Method [Volume 3, Issue 2, 2014, Pages 63-70]
Hasani, Mohammad Ebrahim
Effect of Partitioning Time and Temperature during Q&P Process on Mechanical Properties of 1.5142 Steel [Volume 3, Issue 3, 2014, Pages 1-8]
Honarbakhsh Rauf, Abbas
Effect of Partitioning Time and Temperature during Q&P Process on Mechanical Properties of 1.5142 Steel [Volume 3, Issue 3, 2014, Pages 1-8]
Hossein pour, M.
Fabrication of Dye sensitized solar cell by spherical and Nano pore TiO2 structure [Volume 3, Issue 3, 2014, Pages 43-47]
I
Iron, R.
Preparation of Nanocomposite Fibrous Scaffolds of Poly-3-hydroxybutyrate/Bioactive Glass by Electrospinning Method for Bone Tissue Engineering [Volume 3, Issue 4, 2014, Pages 11-19]
J
Jamalinik, Bita
The effect of bath temperature on structural properties of CdS thin layer produced by chemical bath deposition [Volume 3, Issue 2, 2014, Pages 81-90]
K
Karam Abyan, Mahdi
Effect of Partitioning Time and Temperature during Q&P Process on Mechanical Properties of 1.5142 Steel [Volume 3, Issue 3, 2014, Pages 1-8]
Karbalaei Akbar, Hasan
Effect of Sintering Time on Mechanical and Magnetic Properties of Cemented Carbides [Volume 3, Issue 1, 2014, Pages 1-8]
Karbasi, S.
Preparation of Nanocomposite Fibrous Scaffolds of Poly-3-hydroxybutyrate/Bioactive Glass by Electrospinning Method for Bone Tissue Engineering [Volume 3, Issue 4, 2014, Pages 11-19]
Karbasi, Saeed
Evaluation of Physical and Mechanical Properties of Hydroxyapatite/Titanium dioxide Composite Scaffold for Tissue Engineering Applications [Volume 3, Issue 3, 2014, Pages 17-26]
Kashani Bozorg, Seyed Farshid
Formation of amorphous and nano-crystalline phases via mechanical alloying of elemental powder with stoichiometric composition of Ni0.5Ti0.4Nb0.1 and their thermodynamic evaluation using Medima model [Volume 3, Issue 1, 2014, Pages 9-19]
Kasraee, Kian
Effect of substitution of Si by Al on the structural and microstructural properties of nano Ti5Si3 based alloys prepared by MASHS [Volume 3, Issue 3, 2014, Pages 9-16]
Kazemzad, Mahmood
On the substrate wettability of a tungsten sol for the preparation of WO3 thin films [Volume 3, Issue 4, 2014, Pages 63-69]
Kazemzadeh, A.
Storage Of Hydrogen Fuel In Metal Impregneted Graphene [Volume 3, Issue 1, 2014, Pages 55-60]
Kazemzadeh, A.
Identification of undesirable phases and purification boron carbide - silicon carbide nanocomposite prepared by mechanically activated SHS [Volume 3, Issue 2, 2014, Pages 19-25]
Kazerooni, H.
Fabrication of Dye sensitized solar cell by spherical and Nano pore TiO2 structure [Volume 3, Issue 3, 2014, Pages 43-47]
Keshavarz Alamdari, E.
Protonation of Trioctylamine(TOA) With Sulfuric Acid [Volume 3, Issue 1, 2014, Pages 81-91]
Khatibi, Alireza
The Effect of Time and TiCl4 Salt Concentration on the Nano TiO2/Carbon Composite Microspheres Morphology Synthesized by Solvothermal Method [Volume 3, Issue 2, 2014, Pages 63-70]
Khosroabadi, Hossein
Experimental/theoretical Study on the Effect of Particles Size on Carbothermal Reduction of ZnO [Volume 3, Issue 4, 2014, Pages 35-41]
Kianmehr, Gh.
Acidification of historical wood works by using calcium hydroxide nanoparticles synthesized via chemical processing [Volume 3, Issue 1, 2014, Pages 71-79]
Kianpour, Mansoor
Synthesis of Polycaprolactam/Zinc Doped Hydroxyapatite Nanofibers via Electrospinning [Volume 3, Issue 3, 2014, Pages 59-66]
Kord, Loghman
Electrochemical Study on the Effect of Schiff Base-Chromium Complex on Steel Corrosion in HCl Solution [Volume 3, Issue 4, 2014, Pages 77-83]
M
Mahmoudi, S.
Protonation of Trioctylamine(TOA) With Sulfuric Acid [Volume 3, Issue 1, 2014, Pages 81-91]
Majidi, Amin
Investigation of Thermal Stresses in Micro and Nano-Structured Thermal Barrier Coatings [Volume 3, Issue 3, 2014, Pages 27-33]
Manavizadeh, Negin
Characterization of Ni/Cu Contacts Based on Nickel Electrochemical Method for Multicrystalline Silicon Solar Cells [Volume 3, Issue 4, 2014, Pages 1-9]
Mehdikhani, M.
Preparation of Nanocomposite Fibrous Scaffolds of Poly-3-hydroxybutyrate/Bioactive Glass by Electrospinning Method for Bone Tissue Engineering [Volume 3, Issue 4, 2014, Pages 11-19]
Mirsaeedghazi, S.M.
The effect of substrate preparation and the peak current density in pulse platingof Cu-SiCnanocompositecoatingsonmorphology, grain size, porosity, hardness and corrosion properties [Volume 3, Issue 2, 2014, Pages 27-35]
Mobasherpour, Iman
Remove Pb2+ and Ni2+ heavy metals by hydroxyapatite structure Prepared with acids and bases methods of aqueous solutions [Volume 3, Issue 2, 2014, Pages 71-79]
Mohammadi, M.R.
Preparation of nanostructured TiO2-SnO2 films by aqueous sol-gel for gas sensor application [Volume 3, Issue 1, 2014, Pages 45-53]
Mohtasham, A.
Technical study of stucco ornamens in "Shah-shahan" house using XRD, SEM and wet chemistry [Volume 3, Issue 2, 2014, Pages 37-49]
Mollaei Milani, Javad
Friction Stir Welding of Commercially Pure Aluminum Foams Manufactured by Accumulative Roll-Bonding Process [Volume 3, Issue 3, 2014, Pages 35-42]
Monshi, A.
The Investigating to Physical and Mechanical properties of Nano Polyester matrix composites reinforced with Fiber Glass and silicon carbide [Volume 3, Issue 1, 2014, Pages 61-69]
Moshefi Shabestari, Z.
Protonation of Trioctylamine(TOA) With Sulfuric Acid [Volume 3, Issue 1, 2014, Pages 81-91]
N
Nasr Esfahani, Mojtaba
The corrosion resistance of the composite coatings Polyaniline/Urea-formaldehyde microcapsules containing healing agent [Volume 3, Issue 4, 2014, Pages 21-33]
Nasr Esfahani, Mojtaba
Electrochemical Study on the Effect of Schiff Base-Chromium Complex on Steel Corrosion in HCl Solution [Volume 3, Issue 4, 2014, Pages 77-83]
Nazari, A.
The effect of graphene percent on mechanical properties of Cu/graphene nanocomposites [Volume 3, Issue 1, 2014, Pages 37-43]
Nazemi Ashni, R.
Acidification of historical wood works by using calcium hydroxide nanoparticles synthesized via chemical processing [Volume 3, Issue 1, 2014, Pages 71-79]
Nikbin, S.
Fabrication of Dye sensitized solar cell by spherical and Nano pore TiO2 structure [Volume 3, Issue 3, 2014, Pages 43-47]
Nikzad, L.
Identification of undesirable phases and purification boron carbide - silicon carbide nanocomposite prepared by mechanically activated SHS [Volume 3, Issue 2, 2014, Pages 19-25]
Nikzad, L.
The Synthesis mechanism of B4C-TiB2 composite with spark plasma sintering [Volume 3, Issue 2, 2014, Pages 51-61]
Nourmohammadi, Abolghasem
Characterization and Comparison of the Nanostructured Heterogenous TiO2/Al2O3 and TiO2 Films [Volume 3, Issue 2, 2014, Pages 91-99]
Nusheh, Mohammad
Experimental/theoretical Study on the Effect of Particles Size on Carbothermal Reduction of ZnO [Volume 3, Issue 4, 2014, Pages 35-41]
P
Pakseresht, Amir hossein
Effect of plasma spray parameters on the microstructure anddielectric properties of barium titanate coating [Volume 3, Issue 2, 2014, Pages 1-9]
R
Raad, R.
The Investigating to Physical and Mechanical properties of Nano Polyester matrix composites reinforced with Fiber Glass and silicon carbide [Volume 3, Issue 1, 2014, Pages 61-69]
Rahimipour, Mohamadreza
Effect of plasma spray parameters on the microstructure anddielectric properties of barium titanate coating [Volume 3, Issue 2, 2014, Pages 1-9]
Rahimipour, Mohammad Reza
Investigation of Thermal Stresses in Micro and Nano-Structured Thermal Barrier Coatings [Volume 3, Issue 3, 2014, Pages 27-33]
Rahimipour, M.R.
Synthesis of Polycaprolactam/Zinc Doped Hydroxyapatite Nanofibers via Electrospinning [Volume 3, Issue 3, 2014, Pages 59-66]
Rajaee, Zahra
Synthesis of nanocrystalline Sr0.895Y0.07TiO3±δ by sol-gel method [Volume 3, Issue 2, 2014, Pages 11-18]
Razavi-Alavi, Seyed-Mohammad-Hosein
Effects of CeO2 addition on corrosion resistance and microstructure of the Ni-base coatings [Volume 3, Issue 4, 2014, Pages 43-52]
Roghani-Mamaghani, Hamed
Identification of undesirable phases and purification boron carbide - silicon carbide nanocomposite prepared by mechanically activated SHS [Volume 3, Issue 2, 2014, Pages 19-25]
S
Saatchi, A.
Synthesis of nanocrystalline Sr0.895Y0.07TiO3±δ by sol-gel method [Volume 3, Issue 2, 2014, Pages 11-18]
Saeid, Tohid
Friction Stir Welding of Commercially Pure Aluminum Foams Manufactured by Accumulative Roll-Bonding Process [Volume 3, Issue 3, 2014, Pages 35-42]
Saeri, Mohammad-Reza
Effects of CeO2 addition on corrosion resistance and microstructure of the Ni-base coatings [Volume 3, Issue 4, 2014, Pages 43-52]
Saidi, Ali
Synthesis and Characterization of Al 7014 Nanostructure by Mechanical Alloying [Volume 3, Issue 3, 2014, Pages 79-87]
Salahi, E.
Remove Pb2+ and Ni2+ heavy metals by hydroxyapatite structure Prepared with acids and bases methods of aqueous solutions [Volume 3, Issue 2, 2014, Pages 71-79]
Salahi, E.
Synthesis of Polycaprolactam/Zinc Doped Hydroxyapatite Nanofibers via Electrospinning [Volume 3, Issue 3, 2014, Pages 59-66]
Salahi, Esmaeil
Effect of substitution of Si by Al on the structural and microstructural properties of nano Ti5Si3 based alloys prepared by MASHS [Volume 3, Issue 3, 2014, Pages 9-16]
Salehi, Mehdi
Effect of plasma spray parameters on the microstructure anddielectric properties of barium titanate coating [Volume 3, Issue 2, 2014, Pages 1-9]
Salehiun, L.
Technical study of stucco ornamens in "Shah-shahan" house using XRD, SEM and wet chemistry [Volume 3, Issue 2, 2014, Pages 37-49]
Sarrafi, Mohammad Hasan
The effect of bath temperature on structural properties of CdS thin layer produced by chemical bath deposition [Volume 3, Issue 2, 2014, Pages 81-90]
Semnani, D.
Preparation of Nanocomposite Fibrous Scaffolds of Poly-3-hydroxybutyrate/Bioactive Glass by Electrospinning Method for Bone Tissue Engineering [Volume 3, Issue 4, 2014, Pages 11-19]
Shahrivar, J.
Fabrication of Dye sensitized solar cell by spherical and Nano pore TiO2 structure [Volume 3, Issue 3, 2014, Pages 43-47]
Shayegh Boroujeny, Behrooz
Investigation of Photocathodic Porotection Properties of TiO2/WO3 Coatings Prepared by Sol-Gel [Volume 3, Issue 3, 2014, Pages 49-57]
Shirali, Abdollah
Effect of Partitioning Time and Temperature during Q&P Process on Mechanical Properties of 1.5142 Steel [Volume 3, Issue 3, 2014, Pages 1-8]
Shojaee, T.
The effect of graphene percent on mechanical properties of Cu/graphene nanocomposites [Volume 3, Issue 1, 2014, Pages 37-43]
T
Tayebifard, Ali
Effect of Sintering Time on Mechanical and Magnetic Properties of Cemented Carbides [Volume 3, Issue 1, 2014, Pages 1-8]
Tayebifard, Ali
Effect of substitution of Si by Al on the structural and microstructural properties of nano Ti5Si3 based alloys prepared by MASHS [Volume 3, Issue 3, 2014, Pages 9-16]
Tayebifard, S. A.
The Synthesis mechanism of B4C-TiB2 composite with spark plasma sintering [Volume 3, Issue 2, 2014, Pages 51-61]
Tayebifard, S.A.
Identification of undesirable phases and purification boron carbide - silicon carbide nanocomposite prepared by mechanically activated SHS [Volume 3, Issue 2, 2014, Pages 19-25]
Tayebifard, S.A.
Synthesis of Polycaprolactam/Zinc Doped Hydroxyapatite Nanofibers via Electrospinning [Volume 3, Issue 3, 2014, Pages 59-66]
V
Vaezi, M. R.
Acidification of historical wood works by using calcium hydroxide nanoparticles synthesized via chemical processing [Volume 3, Issue 1, 2014, Pages 71-79]
Vaezi, M.R.
Effect of plasma spray parameters on the microstructure anddielectric properties of barium titanate coating [Volume 3, Issue 2, 2014, Pages 1-9]
Vaezi, M.R.
The Synthesis mechanism of B4C-TiB2 composite with spark plasma sintering [Volume 3, Issue 2, 2014, Pages 51-61]
Y
Yarmand, Benyamin
Fabrication and characterization of dye-sensitized solar cell based on ordered mesoporous TiO2 films [Volume 3, Issue 1, 2014, Pages 21-27]
Yoozbashizadeh, Hossein
The Creation of Nanocomposite Ni-B4C Coatings on Cu by Electrocodeposition and Investigation of Corrosion Behavior [Volume 3, Issue 4, 2014, Pages 53-61]
Youzbashi, A.A.
The effect of bath temperature on structural properties of CdS thin layer produced by chemical bath deposition [Volume 3, Issue 2, 2014, Pages 81-90]
Z
Zakeri, M.
The effect of graphene percent on mechanical properties of Cu/graphene nanocomposites [Volume 3, Issue 1, 2014, Pages 37-43]
Zamani, S.
Remove Pb2+ and Ni2+ heavy metals by hydroxyapatite structure Prepared with acids and bases methods of aqueous solutions [Volume 3, Issue 2, 2014, Pages 71-79]
Zamzamian, Seyed Amirhosein
Investigating effect of CuO and TiO2 Nano Particles on Tribological Characteristics of Engine Oil [Volume 3, Issue 4, 2014, Pages 71-76]
Zendehdel, Mahmoud
Electrochemical Study on the Effect of Schiff Base-Chromium Complex on Steel Corrosion in HCl Solution [Volume 3, Issue 4, 2014, Pages 77-83]